RCBS HAND CASE NECK TURNER
R90401
RCBS HAND CASE NECK TURNER
>>The RCBS Hand Case Neck
Turner is designed to "peel"
the brass from the outside of
your case necks to a
consistent thickness.
>>Most commercially available
brass has variances in the
case neck thickness. This
leads to case neck
concentricity and bullet
run-out issues. Truing up the
case neck produces more
consistent and accurate hand
loaded ammunition.
>>The cutter portion uses
calibre specific
pilot/mandrels (sold
separately) to guide the case
neck.
>>The cutter design features
the ability to "zero" the
cutter to the pilot/mandrel
and then use the micrometre
adjustment to dial the desired
case neck thickness in 0.0005
inch increments. The cutter
can also be set for right or
left hand use.
>>Technical Information:
<>Material: Steel
<>Calibre Sizes Accepted:
17-50 Calibre
<>Pilots Used: RCBS (sold
separately)
<>Accuracy: 0.0005 inch
>>Features:
<>Ergonomic case holder
<>Right or left handed use
<>Micrometer adjustable
<>Ability to zero the cutter
to the pilot/mandrel
Key Features
| Available in: | |
| Brand: | RCBS Reloading Equipment |
