>>Extracts stuck cases from
standard sizer dies without
damaging the die using a very
simple two step removal
process. This item will work
with any brand of die.
>>Includes:
<>Tap
<>Drill bit
<>Allen screw
<>Allen wrench and remover
>>Instructions for use
<>Unscrew the
expander-decapping rod until
the decapping pin is free of
the primer flash hole in the
stuck case
<>Secure the reloading die in
a vice and drill the case head
with the included drill bit
<>Drill straight through the
primer pocket and the primer
flash hole
<>Next tap the case head the
included 1/4-20 tap
<>Place the stuck case remover
body onto the case head and
turn the cap screw with the
allen-type wrench until the
case is pulled from the die
<>Discard the case and
reassemble the die